{"category":{"categoryid":334,"name":"net-analyzer","summary":"The net-analyzer category contains network analysis software."},"packages":[{"categoryid":334,"description":"A bi-directional ping utility","firstseen":"2012-03-18T14:35:43.338747","maintainer":"blueness@gentoo.org","maintainername":"Anthony G. Basile","name":"2ping","packageid":59030},{"categoryid":334,"description":"Periodic ping program","firstseen":"2012-09-17T13:35:59.695431","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"alive","packageid":59820},{"categoryid":334,"description":"Alarm Pinger","firstseen":"2015-01-20T14:37:48.721228","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"apinger","packageid":63009},{"categoryid":334,"description":"network Audit Record Generation and Utilization System","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"argus","packageid":53873},{"categoryid":334,"description":"Clients for net-analyzer\/argus","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"argus-clients","packageid":55085},{"categoryid":334,"description":"ARP scanning and fingerprinting tool","firstseen":"2014-06-06T13:37:19.302284","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"arp-scan","packageid":62288},{"categoryid":334,"description":"Utility to see if a specific IP is taken and what MAC owns it","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"arping","packageid":50185},{"categoryid":334,"description":"Utility to poison ARP caches","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"arpoison","packageid":50896},{"categoryid":334,"description":"ArpON (Arp handler inspectiON) is a portable Arp handler","firstseen":"2011-01-06T14:39:56.687349","maintainer":"hwoarang@gentoo.org","maintainername":"Markos Chandras","name":"arpon","packageid":56663},{"categoryid":334,"description":"Collection of libnet and libpcap based ARP utilities","firstseen":"2010-05-04T00:54:45.661860","maintainer":"robbat2@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"arptools","packageid":54728},{"categoryid":334,"description":"An ethernet monitor program that keeps track of ethernet\/IP address pairings","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"arpwatch","packageid":54633,"summary":"The arpwatch package contains arpwatch and arpsnmp. Arpwatch and arpsnmp are both network monitoring tools. Both utilities monitor Ethernet or FDDI network traffic and build databases of Ethernet\/IP address pairs, and can report certain changes via email. Install the arpwatch package if you need networking monitoring devices which will automatically keep track of the IP addresses on your network."},{"categoryid":334,"description":"An HTTP authentication brute forcer","firstseen":"2010-05-04T00:54:45.661860","name":"authforce","packageid":42156},{"categoryid":334,"description":"Terminal bandwidth utilization tool","firstseen":"2024-12-05T12:18:55.532964","name":"bandwhich","packageid":77962},{"categoryid":334,"description":"Fast output system for Snort","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"barnyard","packageid":51136},{"categoryid":334,"description":"Parser for Snort unified\/unified2 files","firstseen":"2010-05-04T00:54:45.661860","maintainer":"patrick@gentoo.org","maintainername":"Patrick Lauer","name":"barnyard2","packageid":54545,"summary":"Barnyard2 is a fork of the original barnyard project (which is no longer under development). Barnyard2 is an open source interpreter for Snort unified2 binary output files. Its primary use is allowing Snort to write to disk in an efficient manner and leaving the task of parsing binary data into various formats to a separate process that will not cause Snort to miss network traffic. Barnyard2 is under active development and continues to adapt based on user feedback."},{"categoryid":334,"description":"A point-to-point bandwidth measurement tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"xmw@gentoo.org","maintainername":"Michael Weber","name":"bing","packageid":50271},{"categoryid":334,"description":"Interface bandwidth monitor","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"bmon","packageid":49694},{"categoryid":334,"description":"Greenbone Scanner for alive hosts","firstseen":"2024-07-28T18:54:10.891973","name":"boreas","packageid":77670,"summary":"Boreas is a command line tool to scan for alive hosts. It supports IPv4 and IPv6 address ranges and allows to exclude certain addresses from a range. The alive ping tests support ICMP, TCP-ACK, TCP-SYN and ARP and any combination. For TCP ping an individual port list can be applied."},{"categoryid":334,"description":"Quick and dirty mass SNMP scanner","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"braa","packageid":42842},{"categoryid":334,"description":"The kernel.org \"Current bandwidth utilization\" bar","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"bwbar","packageid":47001},{"categoryid":334,"description":"Bandwidth Monitor NG is a small and simple console-based bandwidth monitor","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"bwm-ng","packageid":44154},{"categoryid":334,"description":"Simple ncurses bandwidth monitor","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"bwmon","packageid":46129},{"categoryid":334,"description":"A tool to measure bandwidth and RTT between two hosts using ICMP","firstseen":"2010-06-05T17:11:34.380149","maintainer":"hwoarang@gentoo.org","maintainername":"Markos Chandras","name":"bwping","packageid":55863,"summary":"A tool to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request\/echo reply mechanism."},{"categoryid":334,"description":"Cacti is a complete frontend to rrdtool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"cacti","packageid":50299,"summary":"Cacti is a complete network graphing solution designed to harness the power of RRDTool's data storage and graphing functionality. Cacti provides a fast poller, advanced graph templating, multiple data acquisition methods, and user management features out of the box. All of this is wrapped in an intuitive, easy to use interface that makes sense for LAN-sized installations up to complex networks with hundreds of devices."},{"categoryid":334,"description":"Spine is a fast poller for Cacti (formerly known as Cactid)","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"cacti-spine","packageid":55338,"summary":"Spine (formerly known as Cactid) is a poller for Cacti that primarily strives to be as fast as possible. For this reason it is written in native C, makes use of POSIX threads, and is linked directly against the net-snmp library for minmumal SNMP polling overhead. Spine is a replacement for the default cmd.php poller so you must decide if using Spine makes sense for your installation."},{"categoryid":334,"description":"Parses logfiles of a wide variety of web proxy servers and generates reports","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"calamaris","packageid":41812},{"categoryid":334,"description":"Color Bandwidth Meter","firstseen":"2012-10-23T13:36:29.178591","maintainer":"pinkbyte@gentoo.org","maintainername":"Sergey Popov","name":"cbm","packageid":59925,"summary":"The Color Bandwidth Meter (CBM) is a small program to display the traffic currently flowing through the network devices in a simple curses-based GUI. The traffic for all interfaces include values as receive, transfer and total Bytes\/s or bits\/s (or its multiples as KB\/s and Kb\/s)."},{"categoryid":334,"description":"Monitoring, processing and alerting on time series data","firstseen":"2018-04-03T00:57:46.808622","name":"chronograf","packageid":69062},{"categoryid":334,"description":"Easily upload your wireshark captures to CloudShark","firstseen":"2013-06-03T13:36:23.753283","maintainer":"zerochaos@gentoo.org","maintainername":"Rick Farina","name":"cloudshark","packageid":60808},{"categoryid":334,"description":"Network simulation tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"cnet","packageid":43776},{"categoryid":334,"description":"TCP\/IP Connection cutting on Linux Firewalls and Routers","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"cutter","packageid":46980},{"categoryid":334,"description":"Network traffic analyzer with cute web interface","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"darkstat","packageid":43097,"summary":"darkstat is a network statistics gatherer. It's a packet sniffer that runs as a background process on a cable\/DSL router, gathers all sorts of statistics about network usage, and serves them over HTTP."},{"categoryid":334,"description":"Discover DHCP and BootP servers on a directly-attached Ethernet network","firstseen":"2010-05-04T00:54:45.661860","maintainer":"jer@gentoo.org","maintainername":"Jeroen Roovers","name":"dhcp_probe","packageid":55701},{"categoryid":334,"description":"DHCP Packet Analyzer\/tcpdump postprocessor","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"dhcpdump","packageid":50595,"summary":"This command parses the output of tcpdump to display the dhcp-packets for easier checking and debugging."},{"categoryid":334,"description":"A perl script to enumerate DNS from a server","firstseen":"2012-11-20T14:36:19.681228","maintainer":"zerochaos@gentoo.org","maintainername":"Rick Farina","name":"dnsenum","packageid":60037},{"categoryid":334,"description":"Scan for subdomains using bruteforcing techniques","firstseen":"2020-01-02T01:14:42.512718","name":"dnsmap","packageid":70557},{"categoryid":334,"description":"Determines where a given nameserver gets its information from","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"dnstracer","packageid":53024},{"categoryid":334,"description":"Watches network traffic and displays media from TCP streams observed","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"driftnet","packageid":47704},{"categoryid":334,"description":"A collection of tools for network auditing and penetration testing","firstseen":"2021-12-07T07:08:45.267538","name":"dsniff","packageid":73716,"summary":"dsniff is a collection of tools for network auditing and penetration testing. dsniff, filesnarf, mailsnarf, msgsnarf, urlsnarf, and webspy passively monitor a network for interesting data (passwords, e-mail, files, etc.). arpspoof, dnsspoof, and macof facilitate the interception of network traffic normally unavailable to an attacker (e.g, due to layer-2 switching). sshmitm and webmitm implement active monkey-in-the-middle attacks against redirected SSH and HTTPS sessions by exploiting weak bindings in ad-hoc PKI."},{"categoryid":334,"description":"A graphical network monitor for Unix modeled after etherman","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"etherape","packageid":50694,"summary":"EtherApe is a graphical network monitor for Unix modeled after etherman. Featuring link layer, ip and TCP modes, it displays network activity graphically. Hosts and links change in size with traffic. Color coded protocols display. It supports Ethernet, FDDI, Token Ring, ISDN, PPP and SLIP devices. It can filter traffic to be shown, and can read traffic from a file as well as live from the network."},{"categoryid":334,"description":"Local simulator for testing Linux QoS disciplines","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ethloop","packageid":43328},{"categoryid":334,"description":"Suite for man in the middle attacks","firstseen":"2010-05-04T00:54:45.661860","maintainer":"zerochaos@gentoo.org","maintainername":"Rick Farina","name":"ettercap","packageid":49458},{"categoryid":334,"description":"Scans log files and bans IPs that show malicious signs","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"fail2ban","packageid":42856},{"categoryid":334,"description":"A tool for determining a firewall's rule set","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"firewalk","packageid":43067},{"categoryid":334,"description":"library and programs to process reports from NetFlow data","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"flow-tools","packageid":41817,"summary":"Flow-tools is library and a collection of programs used to collect, send, process, and generate reports from NetFlow data. The tools can be used together on a single server or distributed to multiple servers for large deployments. The flow-toools library provides an API for development of custom applications for NetFlow export versions 1,5,6 and the 14 currently defined version 8 subversions. A Perl and Python interface have been contributed and are included in the distribution."},{"categoryid":334,"description":"Network performance measurement tool","firstseen":"2012-03-19T14:36:29.876719","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"flowgrind","packageid":59031},{"categoryid":334,"description":"Utility to ping multiple hosts at once","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"fping","packageid":47817},{"categoryid":334,"description":"libpcap-based tool to collect network traffic data and emit it as NetFlow flows","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"fprobe","packageid":51689},{"categoryid":334,"description":"Testing of network intrusion detection systems, firewalls and TCP\/IP stacks","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"fragroute","packageid":46449},{"categoryid":334,"description":"Firewall and Intrusion Detection System testing tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ftester","packageid":46409},{"categoryid":334,"description":"A packet filter and firewall log analyzer","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"fwlogwatch","packageid":42190},{"categoryid":334,"description":"Graphical front-ends to various networking command-line","firstseen":"2010-05-04T00:54:45.661860","maintainer":"gnome@gentoo.org","maintainername":"Gentoo GNOME Desktop","name":"gnome-nettool","packageid":45977},{"categoryid":334,"description":"A real-time web log analyzer and interactive viewer in a terminal","firstseen":"2012-07-27T14:43:49.205136","maintainer":"spiderx@spiderx.dp.ua","maintainername":"Vladimir Pavljuchenkov","name":"goaccess","packageid":59622,"summary":"GoAccess is an open source real-time web log analyzer and interactive viewer that runs in a terminal in *nix systems. It provides fast and valuable HTTP statistics for system administrators that require a visual server report on the fly."},{"categoryid":334,"description":"gnuradio fosphor block (GPU spectrum display)","firstseen":"2013-11-06T14:37:19.600699","maintainer":"radio@gentoo.org","maintainername":"Radio","name":"gr-fosphor","packageid":61564},{"categoryid":334,"description":"New script for syncing the Greenbone Community Feed","firstseen":"2023-07-03T09:36:04.146082","name":"greenbone-feed-sync","packageid":76309,"summary":"This is the new script for syncing the Greenbone Community Feed. The greenbone-nvt-sync script was previously installed by net-analyzer\/openvas-scanner."},{"categoryid":334,"description":"Greenbone Security Assistant","firstseen":"2022-05-09T13:43:00.195874","name":"gsa","packageid":74938,"summary":"The Greenbone Security Assistant is the web interface developed for the Greenbone Security Manager appliances. It connects to the Greenbone Vulnerability Manager GVM to provide a full-featured user interface for vulnerability management. Greenbone Security Assistant consists of GSA - The webpage written in React and"},{"categoryid":334,"description":"Greenbone Security Assistant","firstseen":"2022-05-09T13:43:00.195874","name":"gsad","packageid":74939},{"categoryid":334,"description":"A simple GTK\/command line TCP\/IP packet generator","firstseen":"2010-05-04T00:54:45.661860","name":"gspoof","packageid":53813},{"categoryid":334,"description":"Greenbone Vulnerability Management, previously named OpenVAS","firstseen":"2019-10-28T04:28:00.751807","name":"gvm","packageid":70330,"summary":"GVM previously named OpenVAS stands for Open Vulnerability Assessment System and is a network security scanner with associated tools like a graphical user front-end. The core component is a server with a set of network vulnerability tests (NVTs) to detect security problems in remote systems and applications."},{"categoryid":334,"description":"Greenbone Vulnerability Management (GVM) libraries","firstseen":"2019-10-28T04:28:00.751807","name":"gvm-libs","packageid":70331,"summary":"This is the libraries module for the Greenbone Vulnerability Management Solution. It is used for the Greenbone Security Manager appliances and provides various functionalities to support the integrated service daemons."},{"categoryid":334,"description":"Remote control for Greenbone Vulnerability Manager, previously named openvas-cli","firstseen":"2019-03-13T15:06:54.428227","name":"gvm-tools","packageid":69709,"summary":"The Greenbone Vulnerability Management Tools or gvm-tools in short are a collection of tools that help with remote controlling a Greenbone Security Manager (GSM) appliance and its underlying Greenbone Vulnerability Manager (GVM). The tools essentially aid accessing the communication protocols GMP (Greenbone Management Protocol) and OSP (Open Scanner Protocol)."},{"categoryid":334,"description":"Greenbone vulnerability manager, previously named openvas-manager","firstseen":"2019-10-28T04:28:00.751807","name":"gvmd","packageid":70332,"summary":"The Greenbone Vulnerability Manager is the central management service between security scanners and the user clients. It manages the storage of any vulnerability management configurations and of the scan results. Access to data, control commands and workflows is offered via the XML-based Greenbone Management Protocol (GMP). The primary scanner OpenVAS Scanner is controlled directly via protocol OTP while any other remote scanner is coupled with the Open Scanner Protocol (OSP)."},{"categoryid":334,"description":"Network packet sniffer and injector","firstseen":"2017-01-04T16:09:22.898679","name":"hexinject","packageid":66346,"summary":"HexInject is a very versatile packet injector and sniffer, that provide a command-line framework for raw network access. It's designed to work together with others command-line utilities, and for this reason it facilitates the creation of powerful shell scripts capable of reading, intercepting and modifying network traffic in a transparent manner."},{"categoryid":334,"description":"A ping-like TCP\/IP packet assembler\/analyzer","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"hping","packageid":45923},{"categoryid":334,"description":"http protocol ping-like program","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"httping","packageid":50045},{"categoryid":334,"description":"Tool for checking well known weaknesses in the TCP\/IP protocol","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"hunt","packageid":52049},{"categoryid":334,"description":"Parallelized network login hacker","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"hydra","packageid":54709},{"categoryid":334,"description":"Interactive bandwidth monitor","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ibmonitor","packageid":43414},{"categoryid":334,"description":"Distributed, general purpose, network monitoring engine","firstseen":"2014-06-16T13:37:45.606520","maintainer":"prometheanfire@gentoo.org","maintainername":"Matthew Thode","name":"icinga2","packageid":62317},{"categoryid":334,"description":"Set metrics of all IPv4 routes attached to a given network interface at once","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ifmetric","packageid":54299},{"categoryid":334,"description":"Network interface bandwidth usage, with support for snmp targets","firstseen":"2010-05-04T00:54:45.661860","maintainer":"jer@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ifstat","packageid":48337},{"categoryid":334,"description":"Simple CLI program for displaying network statistics in real time","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ifstatus","packageid":43263},{"categoryid":334,"description":"Display bandwidth usage on an interface","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"iftop","packageid":44650},{"categoryid":334,"description":"A utility for finding, fingerprinting and testing IKE VPN servers","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ike-scan","packageid":53550},{"categoryid":334,"description":"IPAudit monitors network activity on a network by host, protocol and port","firstseen":"2010-05-04T00:54:45.661860","maintainer":"robbat2@gentoo.org","maintainername":"Robin H. Johnson","name":"ipaudit","packageid":50371},{"categoryid":334,"description":"Pcap based IP traffic and bandwidth monitor","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ipband","packageid":42145},{"categoryid":334,"description":"Generate list of IP addresses from a network specification","firstseen":"2014-06-07T13:35:30.435908","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ipgen","packageid":62292},{"categoryid":334,"description":"Tool designed to protect LAN IP adress space by ARP spoofing","firstseen":"2014-10-14T13:42:13.271763","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ipguard","packageid":62611},{"categoryid":334,"description":"TCP\/IP traffic logger","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"iplog","packageid":44083},{"categoryid":334,"description":"A daemon which logs TCP\/UDP\/ICMP packets","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ippl","packageid":49703},{"categoryid":334,"description":"Simple TCP\/IP Dump summarizer\/analyzer","firstseen":"2016-03-19T14:41:34.095936","maintainer":"tomboy64@sina.cn","maintainername":"M.B.","name":"ipsumdump","packageid":65168,"summary":"The ipsumdump program summarizes TCP\/IP dump files into a self-describing ASCII format easily readable by humans and programs. The companion ipaggcreate program counts various properties of packet aggregates."},{"categoryid":334,"description":"Console-based network monitoring utility","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"iptraf-ng","packageid":44048,"summary":"IPTraf-ng is a console-based network monitoring program for Linux that displays information about IP traffic."},{"categoryid":334,"description":"IP Tables State displays states being kept by iptables in a top-like format","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"iptstate","packageid":49240},{"categoryid":334,"description":"Set of IPv6 security\/trouble-shooting tools to send arbitrary IPv6-based packets","firstseen":"2016-10-06T13:37:39.164724","name":"ipv6toolkit","packageid":65952},{"categoryid":334,"description":"IP Stack Integrity Checker","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"isic","packageid":50561},{"categoryid":334,"description":"Top like console network traffic visualiser","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"jnettop","packageid":44238},{"categoryid":334,"description":"Monitoring, processing and alerting on time series data","firstseen":"2018-03-26T03:10:57.394240","name":"kapacitor","packageid":69029},{"categoryid":334,"description":"Knocker is an easy to use security port scanner written in C","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"knocker","packageid":53119},{"categoryid":334,"description":"Layer Four Traceroute (LFT) and WhoB","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"lft","packageid":46021,"summary":"(Note that version 3.80 is really 3.8, but released after 3.79.) LFT, short for Layer Four Traceroute, is a sort of 'traceroute' that often works much faster (than the commonly-used Van Jacobson method) and goes through many configurations of packet-filters (firewalls). More importantly, LFT implements numerous other features including AS number lookups through several reliable sources, loose source routing, netblock name lookups, et al. What makes LFT unique? LFT is the all-in-one traceroute tool because it can launch a variety of different probes using ICMP, UDP, and TCP protocols, or the RFC1393 trace method. For example, rather than only launching UDP probes in an attempt to elicit ICMP \"TTL exceeded\" from hosts in the path, LFT can send TCP SYN or FIN probes to target arbitrary services. Then, LFT listens for \"TTL exceeded\" messages, TCP RST (reset), and various other interesting heuristics from firewalls or other gateways in the path. LFT also distinguishes between TCP-based protocols (source and destination), which make its statistics slightly more realistic, and gives a savvy user the ability to trace protocol routes, not just layer-3 (IP) hops. With LFT's verbose output, much can be discovered about a target network. WhoB is a likable whois client (see whois(1)) designed to provide everything a network engineer needs to know about a routed IP address by typing one line and reading one line. But even so, it's worth typing a few more lines because WhoB can do lots of other cool things for you! It can display the origin-ASN based on the global routing table at that time (according to Prefix WhoIs, RIPE NCC, or Cymru), the 'origin' ASN registered in the RADB (IRR), the netname and orgname, etc. By querying pWhoIs, WhoB can even show you all prefixes being announced by a specific Origin-ASN. WhoB performs the lookups quickly, the output is easily parsed by automated programs, and it's included as part of the Layer Four Traceroute (LFT) software package. LFT uses WhoB as a framework (and you can too, quite easily--see whois.h). Recent LFT releases (as of version 2.5) include WhoB functionality through a standalone \"whob\" client\/command placed in the LFT binary directory. LFT and WhoB continue to evolve and provide more and more useful data to network engineers and to anyone else that cares how IP datagrams are being routed. With the advent of smarter firewalls, traffic engineering, QoS, and per-protocol packet forwarding, LFT and WhoB have become invaluable tools for many network managers worldwide."},{"categoryid":334,"description":"Check websites for broken links","firstseen":"2010-05-04T00:54:45.661860","maintainer":"mrueg@gentoo.org","maintainername":"Manuel Rüger","name":"linkchecker","packageid":49682},{"categoryid":334,"description":"Utility for viewing\/manipulating the MAC address of network interfaces","firstseen":"2010-05-04T00:54:45.661860","maintainer":"robbat2@gentoo.org","maintainername":"Robin H. Johnson","name":"macchanger","packageid":51530},{"categoryid":334,"description":"Mass IP port scanner","firstseen":"2014-03-02T14:37:12.887767","maintainer":"robbat2@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"masscan","packageid":61971,"summary":"This is the fastest Internet port scanner. It can scan the entire Internet in under 6 minutes, transmitting 10 million packets per second. It produces results similar to nmap, the most famous port scanner. Internally, it operates more like scanrand, unicornscan, and ZMap, using asynchronous transmission. The major difference is that it's faster than these other scanners. In addition, it's more flexible, allowing arbitrary address ranges and port ranges."},{"categoryid":334,"description":"MBrowse is a graphical MIB browser","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"mbrowse","packageid":44507},{"categoryid":334,"description":"a tool for scanning for mDNS\/DNS-SD published services","firstseen":"2019-10-02T15:33:34.290151","name":"mdns-scan","packageid":70197},{"categoryid":334,"description":"50+ standard plugins for Icinga, Naemon, Nagios, Shinken, Sensu","firstseen":"2015-02-22T14:37:50.776575","maintainer":"hydrapolic@gmail.com","maintainername":"Tomas Mozes","name":"monitoring-plugins","packageid":63110},{"categoryid":334,"description":"A tool to monitor the traffic load on network-links","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"mrtg","packageid":45027},{"categoryid":334,"description":"Addon mrtg contrib for stats ping\/loss packets","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"mrtg-ping-probe","packageid":43643},{"categoryid":334,"description":"My TraceRoute, an Excellent network diagnostic tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"mtr","packageid":47371},{"categoryid":334,"description":"a fork of multimon, decodes multiple digital transmission modes","firstseen":"2013-06-27T13:36:39.570563","maintainer":"zerochaos@gentoo.org","maintainername":"Rick Farina","name":"multimon-ng","packageid":60936},{"categoryid":334,"description":"Analysis tools for Multipath Transmission Control Protocol (MPTCP)","firstseen":"2020-07-03T14:37:52.445292","name":"multipath-tcp-tools","packageid":71274,"summary":"Contains a collection of applications written in C to help both analyze and visualize MPTCP packet traces."},{"categoryid":334,"description":"Munin Server Monitoring Tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"sysadmin@gentoo.org","maintainername":"Gentoo Sysadmin Project","name":"munin","packageid":44581,"summary":"Munin the tool surveys all your computers and remembers what it saw. It presents all the information in in graphs through a web interface. Its emphasis is on plug and play capabilities. After completing a installation a high number of monitoring plugins will be playing with no more effort. Using Munin you can easily monitor the performance of your computers, networks, SANs, and quite possibly applications as well. It makes it easy to determine \"what's different today\" when a performance problem crops up. It makes it easy to see how you're doing capacity wise on all limited resources."},{"categoryid":334,"description":"A Munin plugin for monitoring ZFS on Linux","firstseen":"2017-08-07T05:07:40.607090","name":"munin-plugins-zfs","packageid":67942},{"categoryid":334,"description":"The Nagios metapackage","firstseen":"2010-05-04T00:54:45.661860","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios","packageid":55000,"summary":"Nagios is a host and service monitor designed to inform you of network problems before your clients, end-users or managers do. It has been designed to run under the Linux operating system, but works fine under most *NIX variants as well. The monitoring daemon runs intermittent checks on hosts and services you specify using external \"plugins\" which return status information to Nagios. When problems are encountered, the daemon can send notifications out to administrative contacts in a variety of different ways (email, instant message, SMS, etc.). Current status information, historical logs, and reports can all be accessed via a web browser."},{"categoryid":334,"description":"check_dnssec is a set of Nagios plugins to monitor DNSSEC services","firstseen":"2012-03-20T14:37:13.182177","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios-check_dnssec","packageid":59032},{"categoryid":334,"description":"Nagios check script for GLSAs (Gentoo Linux Security Advisories)","firstseen":"2012-10-01T13:36:46.374789","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios-check_glsa2","packageid":59853},{"categoryid":334,"description":"IPMI Sensor Monitoring Plugin for Nagios\/Icinga","firstseen":"2011-01-17T14:38:38.964140","maintainer":"idl0r@gentoo.org","maintainername":"Christian Ruppert","name":"nagios-check_ipmi_sensor","packageid":56716},{"categoryid":334,"description":"Nagios plugin to monitor bonding status of network interfaces","firstseen":"2014-03-01T14:39:29.303715","maintainer":"ercpe@gentoo.org","maintainername":"Johann Schmitz (ercpe)","name":"nagios-check_linux_bonding","packageid":61964},{"categoryid":334,"description":"A nagios plugin for checking logfiles","firstseen":"2010-05-04T00:54:45.661860","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios-check_logfiles","packageid":55063},{"categoryid":334,"description":"A Nagios plugin to execute multiple checks in parallel","firstseen":"2019-12-21T00:10:31.770584","name":"nagios-check_multiple","packageid":70498},{"categoryid":334,"description":"Nagios plugin for checking MySQL server health","firstseen":"2010-05-13T14:51:00.339246","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios-check_mysql_health","packageid":55761},{"categoryid":334,"description":"Monitor whether or not a host is blacklisted","firstseen":"2012-09-23T13:35:38.721162","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios-check_rbl","packageid":59836},{"categoryid":334,"description":"Nagios core - monitoring daemon, web GUI, and documentation","firstseen":"2010-05-04T00:54:45.661860","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios-core","packageid":54532,"summary":"Nagios is a host and service monitor designed to inform you of network problems before your clients, end-users or managers do. It has been designed to run under the Linux operating system, but works fine under most *NIX variants as well. The monitoring daemon runs intermittent checks on hosts and services you specify using external \"plugins\" which return status information to Nagios. When problems are encountered, the daemon can send notifications out to administrative contacts in a variety of different ways (email, instant message, SMS, etc.). Current status information, historical logs, and reports can all be accessed via a web browser."},{"categoryid":334,"description":"A Nagios plugin to check whether an OpenVPN server is alive","firstseen":"2018-08-16T12:05:58.851172","name":"nagios-icinga-openvpn","packageid":69342},{"categoryid":334,"description":"Nagios plugin to monitor the values of onboard sensors and disk temperatures","firstseen":"2019-01-23T17:53:28.533592","name":"nagios-plugin-check_lm_sensors","packageid":69630},{"categoryid":334,"description":"Nagios\/Icinga plugin to check current server's RAID status","firstseen":"2016-02-21T14:51:58.422770","maintainer":"robbat2@gentoo.org","maintainername":"Robin H. Johnson","name":"nagios-plugin-check_raid","packageid":65041,"summary":"Nagios\/Icinga plugin to check current server's RAID status; this tool wraps MANY different RAID tools and provides a consistent check for them."},{"categoryid":334,"description":"Official plugins for Nagios","firstseen":"2010-05-04T00:54:45.661860","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios-plugins","packageid":49334},{"categoryid":334,"description":"Additional and alternative Nagios plugins for Linux","firstseen":"2019-08-27T23:24:15.638305","name":"nagios-plugins-linux-madrisan","packageid":70104},{"categoryid":334,"description":"Additional Nagios plugins for monitoring SNMP capable devices","firstseen":"2010-05-04T00:54:45.661860","maintainer":"andrew@ahamilto.net","maintainername":"Andrew Hamilton","name":"nagios-plugins-snmp","packageid":51620},{"categoryid":334,"description":"An irc bot that alerts you to nagios changes","firstseen":"2010-05-04T00:54:45.661860","maintainer":"sysadmin@gentoo.org","maintainername":"Gentoo Sysadmin Project","name":"nagircbot","packageid":49618},{"categoryid":334,"description":"systray monitor for displaying realtime status of several monitoring systems","firstseen":"2010-05-04T00:54:45.661860","maintainer":"idl0r@gentoo.org","maintainername":"Christian Ruppert","name":"nagstamon","packageid":48567},{"categoryid":334,"description":"Integrated snmptt visualization addon for the Nagios monitoring system","firstseen":"2010-05-04T00:54:45.661860","name":"nagtrap","packageid":50581},{"categoryid":334,"description":"NAST - Network Analyzer Sniffer Tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nast","packageid":45490},{"categoryid":334,"description":"NBTscan is a program for scanning IP networks for NetBIOS name information","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nbtscan","packageid":46156},{"categoryid":334,"description":"ncurses bandwidth monitor","firstseen":"2014-09-05T13:38:14.595868","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nbwmon","packageid":62505},{"categoryid":334,"description":"Nagios addon to store Nagios data in a database","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ndoutils","packageid":50370},{"categoryid":334,"description":"Cisco netflow probe from libpcap, ULOG, tee\/divert sources","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ndsad","packageid":53060,"summary":"The NetUP ndsad (NetUp Data Stream Accounting Daemon) utility captures IP-traffic from network interfaces and export NetFlow v.5. Data is gathered from libpcap library on Unix and from winpcap on Windows. Also you are able to use tee\/divert sockets on FreeBSD and ULOG on Linux for data source."},{"categoryid":334,"description":"A remote security scanner for Linux - agent component","firstseen":"2017-04-26T12:55:13.978383","name":"nessus-agent-bin","packageid":66785},{"categoryid":334,"description":"A remote security scanner for Linux","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nessus-bin","packageid":48373},{"categoryid":334,"description":"Software for generating and retrieving SNMP data","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"net-snmp","packageid":45140},{"categoryid":334,"description":"The network swiss army knife","firstseen":"2010-05-04T00:54:45.661860","maintainer":"vapier@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"netcat","packageid":46046},{"categoryid":334,"description":"Linux real time system monitoring, done right!","firstseen":"2016-07-02T13:41:16.474310","maintainer":"candrews@integralblue.com","maintainername":"Craig Andrews","name":"netdata","packageid":65597},{"categoryid":334,"description":"Netdata plugin for collectors written in Go","firstseen":"2024-01-05T11:12:30.944688","name":"netdata-go-plugin","packageid":76877},{"categoryid":334,"description":"Active\/passive address reconnaissance tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"netdiscover","packageid":48427},{"categoryid":334,"description":"Small 'net top' tool, grouping bandwidth by process","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nethogs","packageid":52895,"summary":"NetHogs is a small 'net top' tool. Instead of breaking the traffic down per protocol or per subnet, like most tools do, it groups bandwidth by process. NetHogs does not rely on a special kernel module to be loaded. If there's suddenly a lot of network traffic, you can fire up NetHogs and immediately see which PID is causing this. This makes it easy to indentify programs that have gone wild and are suddenly taking up your bandwidth."},{"categoryid":334,"description":"Network performance benchmark","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"netperf","packageid":43431,"summary":"Netperf is a benchmark that can be used to measure the performance of many different types of networking. It provides tests for both unidirectional throughput, and end-to-end latency. The environments currently measureable by netperf include: - TCP and UDP via BSD Sockets for both IPv4 and IPv6 - DLPI - Unix Domain Sockets - SCTP for both IPv4 and IPv6"},{"categoryid":334,"description":"network protocol independent performance evaluator","firstseen":"2017-01-13T14:36:43.434720","name":"netpipe","packageid":66426,"summary":"NetPIPE is a protocol independent performance tool that visually represents the network performance under a variety of conditions. It performs simple ping-pong tests, bouncing messages of increasing size between two processes, whether across a network or within an SMP system. Message sizes are chosen at regular intervals, and with slight perturbations, to provide a complete test of the communication system. Each data point involves many ping-pong tests to provide an accurate timing. Latencies are calculated by dividing the round trip time in half for small messages ( less 64 Bytes )."},{"categoryid":334,"description":"Ultrafast implementation of ping","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"netselect","packageid":45865},{"categoryid":334,"description":"top-like program for network activity","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nettop","packageid":54096},{"categoryid":334,"description":"Ethernet\/PPP IP Packet Monitor","firstseen":"2010-05-04T00:54:45.661860","maintainer":"hwoarang@gentoo.org","maintainername":"Markos Chandras","name":"netwatch","packageid":47517},{"categoryid":334,"description":"A set of tools to collect and process netflow data","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nfdump","packageid":45352,"summary":"nfdump is a toolset to collect and process netflow and sflow data, sent from netflow\/sflow compatible devices. The toolset supports netflow v1, v5\/v7,v9,IPFIX and SFLOW."},{"categoryid":334,"description":"A grep for network layers","firstseen":"2010-05-04T00:54:45.661860","maintainer":"jpr5+gentoo@darkridge.com","maintainername":"Jordan Ritter","name":"ngrep","packageid":44588},{"categoryid":334,"description":"Web server vulnerability scanner","firstseen":"2020-09-28T13:12:37.493543","name":"nikto","packageid":72046},{"categoryid":334,"description":"Real time network traffic monitor for the command line interface","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nload","packageid":51782},{"categoryid":334,"description":"Network exploration tool and security \/ port scanner","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nmap","packageid":50404},{"categoryid":334,"description":"Qt frontend to nmap","firstseen":"2010-05-04T00:54:45.661860","maintainer":"qt@gentoo.org","maintainername":"Gentoo Qt Project","name":"nmapsi","packageid":46368},{"categoryid":334,"description":"Scans the shares of a SMB\/NetBIOS network","firstseen":"2010-05-04T00:54:45.661860","name":"nmbscan","packageid":46374,"summary":"nmbscan scans the shares of a SMB network, using the NMB and SMB protocols. It is useful for acquiring information on a local area network for such purposes as security auditing. It can obtain such information as NMB\/SMB\/Windows hostname, IP address, IP hostname, ethernet MAC address, Windows username, NMB\/SMB\/Windows domain name, and master browser. It can discover all the NMB\/SMB\/Windows hosts on a local area network by using the hosts lists maintained by master browsers."},{"categoryid":334,"description":"Notus is a vulnerability scanner for creating results from local security checks","firstseen":"2023-07-03T09:36:04.146082","name":"notus-scanner","packageid":76310,"summary":"This is a new scanner that scans after every regular scan, so no user interaction is necessary. It offers better performance due to less system resource consumption and thus, faster scanning."},{"categoryid":334,"description":"Nagios Remote Plugin Executor","firstseen":"2012-08-24T14:38:27.144163","maintainer":"sysadmin@gentoo.org","maintainername":"Gentoo Sysadmin Project","name":"nrpe","packageid":59744,"summary":"A daemon for allowing Nagios to connect directly to servers and execute commands defined in a centralized configuration file."},{"categoryid":334,"description":"Network Security Analysis Tool, an application-level network security scanner","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nsat","packageid":42677},{"categoryid":334,"description":"Nagios Service Check Acceptor","firstseen":"2012-08-24T14:38:27.144163","maintainer":"sysadmin@gentoo.org","maintainername":"Gentoo Sysadmin Project","name":"nsca","packageid":59745,"summary":"This program is designed to accept passive service check results from clients that use the send_nsca utility (which is included in this package) and pass them along to the Nagios process by using the external command interface. The program can either be run as a standalone daemon or as a service under inetd. If you have libmcrypt installed on your systems, you can choose from multiple crypto algorithms (DES, 3DES, CAST, xTEA, Twofish, LOKI97, RJINDAEL, SERPENT, GOST, SAFER\/SAFER+, etc.) for encrypting the traffic between the client and the server. Encryption is important in this addon, as it prevents unauthorized users from sending bogus check results to Nagios. Read the included SECURITY document for more information. This package provides the send_nsca utility running on the client."},{"categoryid":334,"description":"Displays statistics about ethernet traffic including protocol breakdown","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"nstats","packageid":48120},{"categoryid":334,"description":"Network traffic analyzer with web interface","firstseen":"2015-02-03T14:38:08.078418","maintainer":"slis@gentoo.org","name":"ntopng","packageid":63052},{"categoryid":334,"description":"Network performance measurement tool","firstseen":"2018-02-17T18:21:29.829745","name":"nuttcp","packageid":68707,"summary":"nuttcp is a network performance measurement tool intended for use by network and system managers. Its most basic usage is to determine the raw TCP (or UDP) network layer throughput by transferring memory buffers from a source system across an interconnecting network to a destination system, either transferring data for a specified time interval, or alternatively transferring a specified number of bytes."},{"categoryid":334,"description":"Open DHCP Locator","firstseen":"2012-10-04T13:38:09.610637","maintainer":"jer@gentoo.org","maintainername":"Jeroen Roovers","name":"odhcploc","packageid":59860},{"categoryid":334,"description":"Rule management for SNORT","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"oinkmaster","packageid":50369},{"categoryid":334,"description":"Internet connection measurement by Ookla","firstseen":"2023-09-23T15:27:52.527798","name":"ookla-speedtest","packageid":76509,"summary":"Speedtest CLI brings the trusted technology and global server network behind Speedtest to the command line. Built for software developers, system administrators and computer enthusiasts alike, Speedtest CLI is the first official Linux-native Speedtest application backed by Ookla."},{"categoryid":334,"description":"The OpenBSD network swiss army knife","firstseen":"2012-11-01T14:39:12.729324","maintainer":"heroxbd@gentoo.org","maintainername":"Benda Xu","name":"openbsd-netcat","packageid":59955},{"categoryid":334,"description":"Open Vulnerability Assessment Scanner","firstseen":"2011-10-10T14:35:19.632471","maintainer":"hanno@gentoo.org","name":"openvas-scanner","packageid":58028,"summary":"Open Vulnerability Assessment System (OpenVAS) Scanner is the Greenbone Vulnerability Management (GVM) Solution. It is used for the Greenbone Security Manager appliances and is a full-featured scan engine that executes a continuously updated and extended feed of Network Vulnerability Tests (NVTs)."},{"categoryid":334,"description":"command line client for the opsgenie service","firstseen":"2019-04-01T21:51:41.585982","name":"opsgenie-lamp","packageid":69756},{"categoryid":334,"description":"This is an OSP server implementation to allow GVM to remotely control OpenVAS","firstseen":"2020-03-25T14:17:48.601117","name":"ospd-openvas","packageid":70951,"summary":"This is an OSP server implementation to allow GVM to remotely control OpenVAS. Once running, you need to configure OpenVAS for the Greenbone Vulnerability Manager, for example via the web interface Greenbone Security Assistant. Then you can create scan tasks to use OpenVAS."},{"categoryid":334,"description":"Open Source Host-based Intrusion Detection System","firstseen":"2018-10-30T10:49:10.404073","name":"ossec-hids","packageid":69500,"summary":"OSSEC is a full platform to monitor and control your systems. It mixes together all the aspects of HIDS (host-based intrusion detection), log monitoring and SIM\/SIEM together in a simple, powerful and open source solution. To determine which build target (agent, server, hybrid or local) best suits your needs, please visit https:\/\/www.ossec.net\/ and review the documentation provided there."},{"categoryid":334,"description":"A tool to perform passive OS detection based on SYN packets","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"p0f","packageid":53794},{"categoryid":334,"description":"Network packet generator and capture tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"packit","packageid":44516},{"categoryid":334,"description":"Non-intrusive utility for estimation of available bandwidth of Internet paths","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"pathload","packageid":51835},{"categoryid":334,"description":"Tool for running Nmap scans and diff'ing the results","firstseen":"2010-05-04T00:54:45.661860","maintainer":"jabra@ccs.neu.edu","maintainername":"Gentoo network monitoring and analysis project","name":"pbnj","packageid":52889},{"categoryid":334,"description":"Cyclic multi ping utility for selected adresses using GTK\/ncurses","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"pinger","packageid":55047},{"categoryid":334,"description":"A network monitoring tool with bandwidth tracking","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"pktstat","packageid":55216},{"categoryid":334,"description":"A network tool to gather IP traffic information","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"pmacct","packageid":44244},{"categoryid":334,"description":"A performance data analyzer for nagios","firstseen":"2010-05-04T00:54:45.661860","maintainer":"sysadmin@gentoo.org","maintainername":"Gentoo Sysadmin Project","name":"pnp4nagios","packageid":46700},{"categoryid":334,"description":"TCP\/IP-based ping implementation","firstseen":"2010-05-04T00:54:45.661860","maintainer":"robbat2@gentoo.org","name":"poink","packageid":51503,"summary":"A TCP\/IP-based ping implementation. It does not require special privileges and is designed for multiuser shell systems. It is meant to be a secure replacement for the standard IPv4 network monitoring tool."},{"categoryid":334,"description":"Common utilities and tools maintained by Greenbone Networks","firstseen":"2024-01-10T09:08:55.492707","name":"pontos","packageid":76885,"summary":"The pontos Python package is a collection of utilities, tools, classes and functions maintained by Greenbone Networks. It is needed to run tests on some Greenbone Vulnerability Management packages."},{"categoryid":334,"description":"Portmon is a network service monitoring daemon","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"portmon","packageid":54228},{"categoryid":334,"description":"Automated port scan detector and response tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"portsentry","packageid":48157},{"categoryid":334,"description":"Ping wrapper that produces coloured, easily readable output","firstseen":"2018-11-03T10:32:35.779729","name":"prettyping","packageid":69508,"summary":"'prettyping' is a wrapper around the standard 'ping' tool, making the output prettier, more colorful, more compact, and easier to read."},{"categoryid":334,"description":"Fast and simple packet creation and parsing library for Python","firstseen":"2013-04-20T13:36:43.659670","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"pypacker","packageid":60661},{"categoryid":334,"description":"Greenbone Vulnerability Management Python Library","firstseen":"2020-01-03T10:46:08.471155","name":"python-gvm","packageid":70561,"summary":"The Greenbone Vulnerability Management Python API library (python-gvm) is a collection of APIs that help with remote controlling a Greenbone Security Manager (GSM) appliance and its underlying Greenbone Vulnerability Manager (GVM). The library essentially abstracts accessing the communication protocols Greenbone Management Protocol (GMP) and Open Scanner Protocol (OSP)."},{"categoryid":334,"description":"RADIUS packet interpreter","firstseen":"2010-05-04T00:54:45.661860","maintainer":"robbat2@gentoo.org","name":"raddump","packageid":44879},{"categoryid":334,"description":"powerful tool for testing stability of utilizing IP protocols","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"rain","packageid":55140},{"categoryid":334,"description":"Read system statistical data and feed it to RRDtool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"rrdcollect","packageid":42035},{"categoryid":334,"description":"A data logging and graphing system for time series data","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"rrdtool","packageid":49327},{"categoryid":334,"description":"Analyze any RTP session through heuristics over UDP network traffic","firstseen":"2010-05-04T00:54:45.661860","name":"rtpbreak","packageid":50466},{"categoryid":334,"description":"The Modern Port Scanner","firstseen":"2024-11-18T12:05:49.379682","name":"rustscan","packageid":77864},{"categoryid":334,"description":"collect network traffic statistics and store them in pcap format","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"sancp","packageid":49130},{"categoryid":334,"description":"Squid Analysis Report Generator","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"sarg","packageid":49583,"summary":"Squid Analysis Report Generator is a tool that allow you to view where your users are going to on the Internet. Sarg provides many informations about Squid users activities: times, bytes, sites, etc..."},{"categoryid":334,"description":"Netcat-clone, designed to be portable and offer strong encryption","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"sbd","packageid":52168,"summary":"sbd is a Netcat-clone, designed to be portable and offer strong encryption. It features AES-CBC-128 + HMAC-SHA1 encryption (by Christophe Devine), program execution (-e option), choosing source port, continuous reconnection with delay, and some other nice features. Only TCP\/IP communication is supported."},{"categoryid":334,"description":"A port scan detection tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"scanlogd","packageid":49619},{"categoryid":334,"description":"network scanner that gathers info on SSH protocols and versions","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"scanssh","packageid":42878,"summary":"Scanssh protocol scanner - scans a list of addresses an networks for running SSH protocol servers and their version numbers."},{"categoryid":334,"description":"A Python interactive packet manipulation program for mastering the network","firstseen":"2010-05-04T00:54:45.661860","maintainer":"ikelos@gentoo.org","maintainername":"Mike Auty","name":"scapy","packageid":55385},{"categoryid":334,"description":"Simple Event Correlator","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"sec","packageid":48004},{"categoryid":334,"description":"Utility for collecting and processing sFlow data","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"sflowtool","packageid":50648},{"categoryid":334,"description":"The official Python library for Shodan","firstseen":"2022-11-23T02:11:49.571805","name":"shodan","packageid":75615,"summary":"Shodan is a search engine for Internet-connected devices. Google lets you search for websites, Shodan lets you search for devices. This library provides developers easy access to all of the data stored in Shodan in order to automate tasks and integrate into existing tools."},{"categoryid":334,"description":"A portable passive network mapping suite","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"siphon","packageid":52338},{"categoryid":334,"description":"Realtime network interface monitor based on FreeBSD's pppstatus","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"slurm","packageid":44717,"summary":"Generic network load monitor for *BSD, Linux, HP-UX and Solaris witgh the next features: * \"realtime\" traffic statistics * three graph modes: combined RX and TX and two split views * can monitor any network device * curses ascii graphics * ascii theme support"},{"categoryid":334,"description":"Finds file leaks and other security problems on HTTP servers","firstseen":"2020-05-06T08:27:41.013135","name":"snallygaster","packageid":71106},{"categoryid":334,"description":"Ncurses SIP Messages flow viewer","firstseen":"2018-02-20T07:56:26.975448","name":"sngrep","packageid":68720},{"categoryid":334,"description":"Interactive Packet Sniffer","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"sniffit","packageid":49221},{"categoryid":334,"description":"Pure-Python SNMP management tools","firstseen":"2020-03-25T07:55:58.805321","name":"snmpclitools","packageid":70950},{"categoryid":334,"description":"SNMP Trap Translator","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"snmptt","packageid":51597},{"categoryid":334,"description":"The de facto standard for intrusion detection\/prevention","firstseen":"2010-05-04T00:54:45.661860","maintainer":"patrick@gentoo.org","maintainername":"Patrick Lauer","name":"snort","packageid":46514,"summary":"Snort is an open source network intrusion prevention and detection system (IDS\/IPS) developed by Sourcefire. Combining the benefits of signature, protocol, and anomaly-based inspection, Snort is the most widely deployed IDS\/IPS technology worldwide. With millions of downloads and approximately 300,000 registered users, Snort has become the de facto standard for IPS."},{"categoryid":334,"description":"A powerful perl script that summarizes snort logs","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"snortalog","packageid":42193},{"categoryid":334,"description":"flow-based network traffic analyser capable of Cisco NetFlow data export","firstseen":"2011-10-13T14:35:13.121878","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"softflowd","packageid":58035},{"categoryid":334,"description":"High performance speedtest.net CLI","firstseen":"2022-04-04T15:52:01.908066","name":"speedtest++","packageid":74726},{"categoryid":334,"description":"Command line interface for testing internet bandwidth using speedtest.net","firstseen":"2013-12-28T14:37:07.939884","maintainer":"zx2c4@gentoo.org","maintainername":"Jason A. Donenfeld","name":"speedtest-cli","packageid":61766},{"categoryid":334,"description":"A SQL Server injection & takeover tool","firstseen":"2012-10-07T13:40:38.245321","maintainer":"pinkbyte@gentoo.org","maintainername":"Sergey Popov","name":"sqlninja","packageid":59866},{"categoryid":334,"description":"Squid logfile analyzer and traffic grapher","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"squid-graph","packageid":51055},{"categoryid":334,"description":"A tool to parse Squid access log file and to generate reports","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"squidsites","packageid":50507},{"categoryid":334,"description":"Interactive console program to analyse squid logs","firstseen":"2011-07-18T14:39:32.482510","name":"squidview","packageid":57616},{"categoryid":334,"description":"SSH server auditing (banner, key exchange, encryption, mac, compression, etc)","firstseen":"2022-05-27T07:08:05.898348","name":"ssh-audit","packageid":75020},{"categoryid":334,"description":"ssh-based ping: measure character echo latency and bandwidth","firstseen":"2021-10-24T16:32:18.131082","name":"sshping","packageid":73455},{"categoryid":334,"description":"An SSLv3\/TLS network protocol analyzer","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ssldump","packageid":52918},{"categoryid":334,"description":"Fast SSL configuration scanner","firstseen":"2012-05-09T15:24:59.195264","maintainer":"graaff@gentoo.org","name":"sslscan","packageid":59272},{"categoryid":334,"description":"Transparent SSL\/TLS interception","firstseen":"2018-03-20T10:30:35.824861","name":"sslsplit","packageid":68994,"summary":"SSLsplit is a tool for man-in-the-middle attacks against SSL\/TLS encrypted network connections. It is intended to be useful for network forensics, application security analysis and penetration testing."},{"categoryid":334,"description":"Tool for testing multicast connectivity","firstseen":"2010-05-04T00:54:45.661860","maintainer":"venaas@uninett.no","maintainername":"Stig Venaas (upstream)","name":"ssmping","packageid":52860},{"categoryid":334,"description":"High performance Network IDS, IPS and Network Security Monitoring engine","firstseen":"2015-11-30T14:39:40.906146","maintainer":"slis@gentoo.org","name":"suricata","packageid":64749},{"categoryid":334,"description":"Performance and information monitoring tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"symon","packageid":43901},{"categoryid":334,"description":"Fast asynchronous half-open TCP portscanner","firstseen":"2010-06-14T14:35:06.660885","name":"synscan","packageid":55898},{"categoryid":334,"description":"Web frontend to symon","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"syweb","packageid":48784},{"categoryid":334,"description":"Tool for network monitoring and data acquisition","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tcpdump","packageid":50706},{"categoryid":334,"description":"A tool for monitoring, capturing and storing TCP connections flows","firstseen":"2021-02-12T16:08:15.045258","name":"tcpflow","packageid":72470},{"categoryid":334,"description":"Check if a desired port is reachable via TCP","firstseen":"2012-05-24T14:37:45.525334","maintainer":"xmw@gentoo.org","maintainername":"Michael Weber","name":"tcping","packageid":59362},{"categoryid":334,"description":"TCP network re-engineering tool","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tcpreen","packageid":48058},{"categoryid":334,"description":"Utilities for editing and replaying previously captured network traffic","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tcpreplay","packageid":49844,"summary":"Tcpreplay is a suite of utilities for UNIX systems for editing and replaying network traffic which was previously captured by tools like tcpdump and ethereal\/wireshark. The goal of tcpreplay is to provide the means for providing reliable and repeatible means for testing a variety of network devices such as switches, router, firewalls, network intrusion detection and prevention systems (IDS and IPS)."},{"categoryid":334,"description":"Extract and concatenate portions of pcap files","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tcpslice","packageid":51564},{"categoryid":334,"description":"tcptraceroute is a traceroute implementation using TCP packets","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tcptraceroute","packageid":54313},{"categoryid":334,"description":"Passive per-connection tcp bandwidth monitor","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tcptrack","packageid":45008},{"categoryid":334,"description":"The plugin-driven server agent for collecting & reporting metrics","firstseen":"2018-03-25T23:28:59.890367","name":"telegraf","packageid":69028},{"categoryid":334,"description":"A terminal UI for tshark, inspired by Wireshark","firstseen":"2022-05-16T06:44:44.459128","name":"termshark","packageid":74973},{"categoryid":334,"description":"Tool to check TLS\/SSL cipher support","firstseen":"2015-10-05T13:39:31.136642","maintainer":"kensington@gentoo.org","name":"testssl","packageid":64459},{"categoryid":334,"description":"Complete tool set to attack the inherent protocol weaknesses of IPV6 and ICMP6","firstseen":"2010-09-15T14:33:57.339430","maintainer":"xmw@gentoo.org","maintainername":"Michael Weber","name":"thc-ipv6","packageid":56284},{"categoryid":334,"description":"Measure the capacity of a network by sending a bulk TCP stream over it","firstseen":"2010-05-04T00:54:45.661860","maintainer":"robbat2@gentoo.org","name":"thrulay","packageid":49105},{"categoryid":334,"description":"Blinks keyboard LEDs indicating outgoing and incoming network packets","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tleds","packageid":50914},{"categoryid":334,"description":"Internet bandwidth tester","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tptest","packageid":53248},{"categoryid":334,"description":"A Middlebox Detection Tool","firstseen":"2014-06-27T13:37:29.911070","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"tracebox","packageid":62332},{"categoryid":334,"description":"Utility to trace the route of IP packets","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"traceroute","packageid":42046},{"categoryid":334,"description":"A network diagnostic tool","firstseen":"2023-12-10T19:35:48.403571","name":"trippy","packageid":76791},{"categoryid":334,"description":"Erlang's multi-protocol distributed load testing tool","firstseen":"2011-03-17T14:38:02.187254","maintainer":"patrick@gentoo.org","maintainername":"Patrick Lauer","name":"tsung","packageid":57111},{"categoryid":334,"description":"Tool to test TCP and UDP throughput","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"ttcp","packageid":55202},{"categoryid":334,"description":"Modern traceroute\/mtr-style TUI with hop stats and optional ASN\/geo enrichment","firstseen":"2026-01-23T17:29:01.131025","name":"ttl","packageid":78738},{"categoryid":334,"description":"Scans the network for UPnP capable devices","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"upnpscan","packageid":42659,"summary":"A tool that scans the LAN or a given address range for UPnP capable devices. This is done by sending M-SEARCH discovery packets to either the UPnP multicast address or to the specified ip range."},{"categoryid":334,"description":"Console-based network traffic monitor that keeps statistics of network usage","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"vnstat","packageid":47606,"summary":"vnStat is a network traffic monitor for Linux that keeps a log of daily network traffic for the selected interface(s). vnStat isn't a packet sniffer. The traffic information is analyzed from the \/proc filesystem. That way vnStat can be used even without root permissions."},{"categoryid":334,"description":"Poor man's web vulnerability scanner","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"webfuzzer","packageid":44858},{"categoryid":334,"description":"Network protocol analyzer (sniffer)","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"wireshark","packageid":44002,"summary":"Wireshark is the world's foremost network protocol analyzer, and is the de facto (and often de jure) standard across many industries and educational institutions. Wireshark has a rich feature set which includes 1) deep inspection of hundreds of protocols, with more being added all the time, 2) live capture and offline analysis, 3) standard three-pane packet browser, 4) captured network data can be browsed via a GUI, or via the TTY-mode TShark utility, 5) the most powerful display filters in the industry, 6) rich VoIP analysis, 7) read\/write many different capture file formats: tcpdump (libpcap), Catapult DCT2000, Cisco Secure IDS iplog, Microsoft Network Monitor, Network General Sniffer® (compressed and uncompressed), Sniffer® Pro, and NetXray®, Network Instruments Observer, Novell LANalyzer, RADCOM WAN\/LAN Analyzer, Shomiti\/Finisar Surveyor, Tektronix K12xx, Visual Networks Visual UpTime, WildPackets EtherPeek\/TokenPeek\/AiroPeek, and many others, 8) capture files compressed with gzip can be decompressed on the fly, 9) live data can be read from Ethernet, IEEE 802.11, PPP\/HDLC, ATM, Bluetooth, USB, Token Ring, Frame Relay, FDDI, and others, 10) decryption support for many protocols, including IPsec, ISAKMP, Kerberos, SNMPv3, SSL\/TLS, WEP, and WPA\/WPA2, 11) coloring rules can be applied to the packet list for quick, intuitive analysis, 12) output can be exported to XML, PostScript®, CSV, or plain text."},{"categoryid":334,"description":"Passive hostname, domain and IP lookup tool for non-robots","firstseen":"2022-11-23T02:11:49.571805","name":"wtfis","packageid":75616,"summary":"wtfis is a commandline tool that gathers information about a domain, FQDN or IP address using various OSINT services. Unlike other tools of its kind, it's built specifically for human consumption, providing results that are pretty (YMMV) and easy to read and understand."},{"categoryid":334,"description":"Displays a count and a graph of the traffic over a specified network connection","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"xnetload","packageid":48383},{"categoryid":334,"description":"Active OS fingerprinting tool - this is Xprobe2","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"xprobe","packageid":52123,"summary":"Active OS fingerprinting tool. This is the new xprobe, called xprobe2, due to xprobe1 being obsoleted. xprobe2 has a different approach to OS fingerprinting. xprobe2 relies on fuzzy signature matching, probabilistic guesses, multiple matches simultaneously, and a signature database."},{"categoryid":334,"description":"A framework for layer 2 attacks","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"yersinia","packageid":50249,"summary":"Yersinia is a network tool designed to take advantage of some weakeness in different network protocols. It intends to be a solid framework for analyzing and testing the deployed networks and systems."},{"categoryid":334,"description":"ZABBIX is software for monitoring of your applications, network and servers","firstseen":"2010-05-04T00:54:45.661860","maintainer":"patrick@gentoo.org","maintainername":"Patrick Lauer","name":"zabbix","packageid":45300,"summary":"ZABBIX is software for monitoring of your applications, network and servers. ZABBIX supports both polling and trapping techniques to collect data from monitored hosts. A flexible notification mechanism allows easy and quickly configure different types of notifications for pre-defined events."},{"categoryid":334,"description":"Fast network scanner designed for Internet-wide network surveys","firstseen":"2013-09-21T13:36:25.719637","maintainer":"jlec@gentoo.org","name":"zmap","packageid":61414,"summary":"ZMap is an open-source network scanner that enables researchers to easily perform Internet-wide network studies. With a single machine and a well provisioned network uplink, ZMap is capable of performing a complete scan of the IPv4 address space in under 45 minutes, approaching the theoretical limit of gigabit Ethernet. ZMap can be used to study protocol adoption over time, monitor service availability, and help us better understand large systems distributed across the Internet."},{"categoryid":334,"description":"Displays and kill active TCP connections seen by the selected interface","firstseen":"2010-05-04T00:54:45.661860","maintainer":"netmon@gentoo.org","maintainername":"Gentoo network monitoring and analysis project","name":"zniper","packageid":42437}]}